PLC Products

ControllersPLC CPUs

Compatible with the FX instruction set; program, download and monitor with GX Developer or GX Works2. The 3U supports Ethernet and Modbus-TCP master / slave.

3U series

3U series PLC

8-axis 200K high-speed pulse positioning on board, CAN bus with 1 master and 32 slaves, Ethernet Modbus-TCP server and client, 32,000-step program capacity.

8-axis 200K positioningCAN 1 master / 32 slavesEthernet

2N series

2N series PLC

4-axis 100K pulse positioning, 6 channels of 20K high-speed counting with 2 AB-phase encoders, one RS232 plus one RS485 supporting Modbus master / slave, optional 220V supply with 24V/1A output.

4-axis 100K positioningModbus master / slaveOptional 220V supply

1N series

1N series PLC

For cost-sensitive small machines: 8,000-step capacity while keeping high-speed counting and pulse positioning — a drop-in replacement for existing FX1N CPUs.

8,000 stepsCost effectiveFor small machines

3U series · 18 / 32 points 18 & 32 Points

Model	I/O	Analog	Ports	Dimensions	Notes
3U18MTR2AD1DA	8 / 10	2AD · 1DA	RS232 + RS485×2	120×80×65	8 transistor + 2 relay
3U18MTRE2AD1DA	8 / 10	2AD · 1DA	RS232 + RS485×2 + Ethernet	120×80×65	8 transistor + 2 relay
3U18MR2AD1DA	8 / 10	2AD · 1DA	RS232 + RS485×2	120×80×65	10 relays
3U18MRE2AD1DA	8 / 10	2AD · 1DA	RS232 + RS485×2 + Ethernet	120×80×65	10 relays
3U-32MR	16 / 16	—	RS232 + RS232/485 + RS485 + CAN	140×80×65	Relay output
3U-32MRE	16 / 16	—	Same + Ethernet	140×80×65	Relay output
3U-32MT	16 / 16	—	RS232 + RS232/485 + RS485 + CAN	140×80×65	Transistor output
3U-32MTE	16 / 16	—	Same + Ethernet	140×80×65	Transistor output

3U series · 40 / 48 / 60 points 40 / 48 / 60 Points

Model	I/O	Analog	Ports	Dimensions	Notes
40MT-4AD1DA	24 / 16	4AD · 1DA	RS232 + RS232/485 + RS485 + CAN	197×80×65	AD configurable as NTC temperature input
40MTE-4AD1DA	24 / 16	4AD · 1DA	Same + Ethernet	197×80×65	AD configurable as NTC temperature input
40MR-4AD1DA	24 / 16	4AD · 1DA	RS232 + RS232/485 + RS485 + CAN	197×80×65	Relay output
40MRE-4AD1DA	24 / 16	4AD · 1DA	Same + Ethernet	197×80×65	Relay output
48MT-CAN	24 / 24	—	RS232 + RS232/485 + RS485 + CAN	197×80×65	—
48MTE-CAN	24 / 24	—	Same + Ethernet	197×80×65	—
48MT-2AD1DA	24 / 24	2AD · 1DA	RS232 + RS232/485 + RS485	197×80×65	—
48MTE-2AD1DA	24 / 24	2AD · 1DA	Same + Ethernet	197×80×65	Photographed model from the selection guide
48MR-2AD1DA	24 / 24	2AD · 1DA	RS232 + RS232/485 + RS485	197×80×65	Relay output
48MRE-2AD1DA	24 / 24	2AD · 1DA	Same + Ethernet	197×80×65	Relay output
60MT	30 / 30	—	RS232 + RS232/485 + RS485	197×80×65	—

3U series · compact and high-density Compact

Model	I/O	Analog	Ports	Dimensions	Notes
3U-16MTRE	8 / 8	—	RS232 + RS485×2 + Ethernet	125×90×40	Clear housing, 4 transistor + 4 relay
24MT-4AD2DA	16 / 8	2AD + 2NTC · 2DA	RS232 + RS485×2	125×90×40	Clear housing, single-board design
3U-80MRE	40 / 40	—	RS232 + RS485×2 + Ethernet	270×76×48	Black DIN-rail base, all relay outputs
32MT2AD2DA	16 / 16	2AD · 2DA	RS232 + RS485×2	134×72×40	Pin-header connection saves wiring; green DIN housing available

2N / 1N series · standard Standard

Model	I/O	Analog	Ports	Dimensions	Notes
16MR	8 / 8	—	RS232 + RS485	90×80×65	Relay output
16MR-2AD	8 / 8	2AD	RS232 + RS485	90×80×65	AD selectable current or voltage
16MT	8 / 8	—	RS232 + RS485	90×80×65	Transistor output
16MTR	8 / 8	—	RS232 + RS485	90×80×65	4 transistor + 4 relay
16MTP-2AD	8 / 8	2AD	RS232 + RS485	90×80×65	Outputs with C0 common
32MT	16 / 16	—	RS232 + RS485	120×80×65	Two isolated output groups, C0 / C1 commons
32MTP	16 / 16	—	RS232 + RS485	120×80×65	Two isolated output groups, C0 / C1 commons
48MT	24 / 24	—	RS232 + RS485	120×80×65	Two isolated output groups, C0 / C1 commons
45MT	29 / 16	—	RS232 + RS485	196×80×65	Bottom-in, top-out wiring
45MR	29 / 16	—	RS232 + RS485	196×80×65	Bottom-in, top-out wiring
60MT	36 / 24	—	RS232 + RS485	196×80×65	—
22MR	14 / 18	—	RS232 + RS485	125×80×65	Clear housing, low cost
26MR	12 / 14	4 channels	RS232 + RS485 + CAN	165×75×65	10A relays; with a CT board, senses three-phase current up to 50A

2N / 1N series · analog integrated Analog Built-in

Model	I/O	Analog	Ports	Dimensions	Notes
26MR-2AD2DA	14 / 12	2AI · 2AO	RS232 + RS232/485 + optional CAN	137×80×65	AD with current / voltage selector switch
32MR-2AD2DA	16 / 16	2AI · 2AO	RS232 + RS232/485	137×80×65	AD requires selecting current or voltage
32MR-4AD2DA	16 / 16	4AI · 2AO	RS232 + RS232/485	137×80×65	Relay output
32MT-2AD2DA	16 / 16	2AI · 2AO	RS232 + RS232/485	137×80×65	Transistor output
32MT-4AD2DA	16 / 16	4AI · 2AO	RS232 + RS232/485	137×80×65	Transistor output

2N / 1N series · compact Compact

Model	I/O	Analog	Ports	Dimensions	Notes
16MTS	8 / 8	—	RS232	65×80×45	Compact, for small machines or I/O communication
14MRS	8 / 6	—	RS232	65×80×45	—
16MTP	8 / 8	—	RS232 + RS485	65×80×45	—
14MRP	8 / 6	—	RS232 + RS485	65×80×45	—
8MR3AD1DA	4 / 4	3AI · 1AO	RS485×2	65×80×45	—

Special FunctionSpecial-function PLC

Dedicated models integrated on a proven PLC platform — no add-on modules or secondary development.

Weighing

Weighing PLC

Bridge-sensor interface on board, outputting raw AD values; the high-speed version samples 400 times per second with roughly 100,000 counts of resolution. The weighing port also accepts RTDs or thermocouples for high-accuracy temperature measurement. Sample programs included.

1–2 weighing channelsUp to 400 HzUsable as temperature input

Motor

DC motor control PLC

Full-bridge output drives 24V brushed DC motors at 20A PWM, with speed control, forward / reverse, braking, overload and short-circuit protection — suited to packaging machinery and vehicle equipment.

PWM 20AFull-bridge driveOverload protection

Current sensing

CT-sensing PLC

Up to nine current transformers sense AC current up to 50A, with 12 inputs and 10 outputs — easy to build into a motor protector or current monitor.

9 CT channelsUp to 50AMotor protection

Weighing PLC models Weighing

Model	I/O	Weighing channels	Ports	Rate & resolution	Notes
16MTS-1W	8 / 8	1 channel	RS232 + RS485	10 Hz, approx. 40k counts	Compact, low cost
26MTS	10 / 16	—	RS232/RS485 + RS485 + CAN	—	Standard, no weighing port
26MTS-1W	10 / 16	1 channel	RS232/RS485 + RS485 + CAN	10 Hz	—
26MTS-1WH	10 / 16	1 channel	RS232/RS485 + RS485 + CAN	400 Hz, approx. 100k counts	Resolution after calibration, high-speed weighing
26MTS-2WH	10 / 16	2 channels	RS232/RS485 + RS485 + CAN	200 Hz, approx. 100k counts	Dual-scale synchronous sampling

Weighing models output raw AD values only; zeroing and calibration are done in the program, which suits customers already familiar with weighing. Otherwise choose a weighing expansion module.

Motor and current-sensing models Motor & Current

Model	I/O	Dedicated channel	Ports	Dimensions	Notes
24MT-DCC	8 / 15	1 DC motor	RS232/485 + RS485 + CAN	196×80×65	Full bridge, 24V brushed motor, 20A PWM
26MT-2DCC	10 / 16	2 DC motors	RS232/485 + RS485 + CAN	196×80×65	20A PWM, two motors controlled independently
22MT-9CT	12 / 10	9 CT channels	RS422 + RS485×2	140×80×45	Senses AC current up to 50A

Expansion ModulesExpansion modules (E series)

CAN expansion ribbon cable and RS485 port: connects to Sinocon CPUs through the expansion port, or to third-party PLCs and host systems over RS485.

Digital I/O

Digital I/O modules

Input-only, output-only and mixed types; relay or transistor outputs; input polarity jumper-selectable NPN or PNP; up to 15 modules.

NPN / PNP selectableUp to 15DIN-rail mount

Analog

Analog modules

Two lines: 12-bit standard and 24-bit high precision. Inputs must be specified as current or voltage; outputs provide both. E4AD-H supports channel isolation and differential input.

12-bit / 24-bitDifferential inputChannel isolation

Temperature

Temperature input modules

Full coverage of thermocouple, RTD and NTC signals, measuring -40 to 1300 °C; selected models support channel-to-channel isolation.

K / E / J thermocouplesPT100NTC

Weighing

Weighing modules

24-bit AD with anti-vibration filtering and zero tracking. Standard versions support up to 15 modules and 60 weighing channels; the high-speed version samples 1,600 times per second, suited to dosing and checkweighing.

24-bit ADZero trackingUp to 1,600 Hz

Digital I/O expansion Digital I/O

Model	Input	Output	Comms	Dimensions	Notes
E8X	8	—	RS485	70×80×65	Input polarity set by jumper (NPN / PNP); read-only over RS485 when connected via the expansion port
E8YR	—	8	RS485	70×80×65	Relay output
E16X	16	—	RS485	70×80×65	Input polarity set by jumper (NPN / PNP)
E20X	20	—	RS485	70×80×65	Input polarity set by jumper (NPN / PNP)
E16MR	8	8	RS485	70×80×65	Relay output
E16YR	—	16	RS485	70×80×65	Relay output
E16YT	—	16	RS485	70×80×65	Transistor output
E32MR	16	16	RS485	138×80×65	S/S terminal selects NPN or PNP

Analog expansion Analog I/O

Model	Input signal	Output signal	Input / output channels	Resolution	Notes
E4AD2DA	4-20mA or 0-10V	0-20mA + 0-10V	4 / 2	12-bit	Only the last module in a chain can use two DA channels; intermediate modules get one
E8AD2DA	4-20mA or 0-10V	0-20mA + 0-10V	8 / 2	12-bit	Same as above
E6DAIV	—	0-20mA + 0-10V	— / 6	12-bit	Up to 3 E6DA modules
E4AD-H	±20mA or ±10V	—	4 / —	24-bit	Channel isolation, differential input, 10 or 40 Hz, with data filtering

Temperature input expansion Temperature

Model	Signal type	Input channels	Measurement range	Comms	Notes
E4TC	Thermocouple K / E / J	4	-40~1300℃	RS485	Isolated from internal circuitry; channels not isolated from each other
E8TC	Thermocouple K / E / J	8	-40~1300℃	RS485	Isolated from internal circuitry; channels not isolated from each other
E4PT	RTD PT100 (two-wire)	4	-40~400℃	RS485	Isolated from internal circuitry; channels isolated
E8NTC	NTC thermistor (B=3950)	8	-40~120℃	RS485	Not isolated from internal circuitry

Weighing expansion Weighing

Model	Channels	Sampling rate	Comms	Dimensions	Notes
E1WM	1	10 Hz	RS485	70×80×65	Standard weighing, strong filtering
E2WM	2	10 or 40 Hz	RS485	70×80×65	Force measurement, silo weight
E4WM(S)	4	10 or 40 Hz	RS485	70×80×65	E4WM: up to 4 modules / 16 channels; E4WS: up to 15 modules / 60 channels
E1WH	1	1,600 Hz	RS485	70×80×65	High-speed weighing for packaging machinery and checkweighers
E2WH	2	200 Hz	RS485	70×80×65	High-speed dual channel: fast, accurate, stable

Vibratory feeder expansion Vibratory Feeder

Model	Output channels	Adjustment range	Comms	Dimensions	Notes
E2S	2	0-1000	RS485	70×80×65	Magnet vibration intensity controlled by AC conduction angle, for 220V bowl feeders
E4S	4	0-1000	RS485	70×80×65	Same as above; up to 4 modules

E series common features: baud rate 9600–115200 and station ID set by configuration software, MODBUS-RTU protocol; up to 15 modules when connected through the expansion port.

Drive ModulesControl & drive modules

Relay and transistor modules that sit independent of the PLC, for output expansion or isolated driving.

Relay

Relay modules

Outputs are isolated dry contacts rated 5A / 8A / 16A, in 4, 8 or 12 channels; coils accept 12V or 24V.

Isolated dry contactUp to 16A4 / 8 / 12 channels

Transistor

Transistor modules

NPN and PNP output types with flyback diodes, output current up to 5A; bi-directional optocoupler input accepts NPN or PNP, 12V or 24V.

NPN / PNPFlyback diodeBi-directional optocoupler

Relay module models REL Series

Model	Channels	Contact form	Rated current	Notes
REL-825	8	2NO + 2NC	5A	Isolated dry contact, 12V / 24V coil
REL-818	8	1NO + 1NC	8A	Isolated dry contact, 12V / 24V coil
REL-815	8	1NO	16A	High-current load driving

Transistor module models MOS Series

Model	Inputs	Outputs	Output current	Output type	Dimensions
MOS-8	8	8	3A	NPN	65×80×45
MOS-8P	8	8	3A	PNP	65×80×45

Custom & TurnkeyDedicated & custom units

Specialised variants of a proven PLC platform, or fully custom control boards and machine control solutions built around your process.

All-in-one

HMI all-in-one unit

A 7-inch MCGS HMI paired with a reworked FX1N PLC board: 12 inputs, 14 transistor outputs, 4 analog inputs and 2 analog outputs, one RS232 and one RS485 — saving cabinet space.

7-inch HMI12 in / 14 out4AI + 2AO

Bus module

E2W2S bus module

Two weighing channels, two vibratory feeder controls and two 5V DC motor forward / reverse outputs, controlled over CAN or RS485 with address DIP switches — designed for weighing and packaging machinery.

2 scales + 2 feedersCAN / 485Address DIP switch

Custom

Custom dedicated controllers

Control boards and dedicated controllers built to your process, with proven designs to reference: burner control board, tea packaging machine controller, matrix board, magnetic powder clutch power supply.

Custom boardsProcess logic fixedFast prototyping

Accessories Accessories

Our	Specifications	Dimensions
HMI all-in-one unit	7-inch MCGS HMI + reworked FX1N PLC board; 12 in / 14 transistor out; 4AI (0-10V / 0-20mA) + 2AO (0-10V); 1×RS232 + 1×RS485	—
E2W2S bus module	Two weighing + two bowl feeder + two 5V DC motor forward / reverse channels; CAN or RS485 control with address DIP switches	95×80×45
Tea packaging machine controller	Full-sequence control of dual-head vibratory feeding, two weighing channels, discharging, bag pick-up, opening, shaping, sealing and bag ejection, with HMI parameter setting.	—
Burner control board	Two temperature setpoints and displays, ignition control, gas valve control and flame detection; for gas ovens and furnaces.	—
Magnetic powder clutch power supply	Input 0-10V or RS485, output 0-24V at up to 5A; the output tracks the input linearly with display, plus overload and short-circuit protection.	65×90×45
Matrix board	8 in / 8 out, expandable to 64 inputs, for PLC input expansion; DC24V supply, NPN and PNP versions.	195×80×45
DC motor controller	Controls forward / reverse, speed and braking of 500W DC motors, with current display, parameter setting, overload and short-circuit protection.	135×80×45
Isolated communication converter	RS232 to RS485, or RS232-RS232 isolation; three-way isolation of input, output and supply, with surge and interference protection and signal reshaping.	45×80×65
PS30-24 power supply	Input 120-240VAC 50-60Hz, output DC24V-1A; overload and short-circuit protection.	45×80×65

SpecificationCommunication & specifications

Communication and hardware specifications of the 3U board, differences against the FX series, and the model numbering rules.

3U board communication and hardware 3U Hardware

Item	Specification
Programming software	GX Developer / GX Works2, compatible with FX1N / FX2N / FX3U
Serial ports	COM0 is RS232, COM1 is RS232/RS485, COM2 is RS485; all three support programming, download and monitoring
Serial protocols	FX protocol + Modbus + free RS protocol
Ethernet	10M/100M, supports programming, download and monitoring; Modbus-TCP server and client
CAN bus	1 master, 32 slaves; 32 shared registers per station
Digital inputs	DC24V, NPN and PNP
Digital outputs	Transistor 1A, relay 5A
High-speed counting	6 × 20K, supporting 2 AB-phase encoders
High-speed pulse	200K × 8, for 8-axis positioning
Expansion	Up to 15 modules
On-board potentiometers	RV0 → D8030, RV1 → D8031, range 0-4095
IP protection	Option 1: set the dedicated password to 12345678 to disable upload — cannot be cracked. Option 2 (custom): the program is erased the moment an upload is attempted.

FX1N / FX2N / FX3U comparison Performance

Item	FX1N	FX2N	FX3U
Program capacity	8,000 steps	8,000 steps	32,000 steps
Floating point	Runs but cannot be edited	Supported	Supported
Positioning instructions	Supported	Runs but cannot be edited	Supported
PLSV accel / decel	Not supported	Not supported	Supported (M8338)
High-speed comparison	Not supported	Not supported	Supported
COM1 baud rate	9600 / 19200 auto	2400-115200（D8400）	2400-115200（D8400）
COM2 baud rate	2400-115200（D8120）	2400-115200（D8120）	2400-115200（D8420）

Model numbering rules Naming Rule

Segment	Meaning	Values
①	Series	1N / 2N / 3U / E (expansion)
②	Total I/O points	16 / 26 / 32 / 40 / 48 / 60 / 80 etc.
③	Unit type	M: mixed I/O; X: input only; Y: output only
④	Output type	R: relay; T: transistor
⑤	Ethernet (optional)	E
⑥	Analog inputs	1～6
⑦	Analog input type	I: current; V: voltage; TC: thermocouple; NTC: thermistor
⑧	Analog outputs	1 / 2
⑨	Analog output type	I: current; V: voltage

Example: 3U-40MTE-4ADI1DAV means 3U series, 40 points, mixed unit, transistor output, with Ethernet, 4 current-type analog inputs and 1 voltage-type analog output. Derivative suffixes exist (e.g. 16MTP, 26MTS, 22MT-9CT, 24MT-DCC) — always refer to the model table when selecting.

Technical downloads

PLC manuals, E series expansion module instructions and Modbus protocol documents — 9 PDF files, searchable by file name or model keyword.

Go to downloads